VIP 10
Single channel MPEG-4
Video Transmitter or Receiver
The VIP 10 features S-VHS
quality MPEG-4 video at up to 30 fps and
full-duplex audio over IP networks. Supporting
PAL or NTSC sources it is available as
transmitter or receiver.
The video signal can be
received and displayed with a standard browser
or decoding software VIDOS. Using the receiver
you can integrate box-to-box connections to your
system to show video from any MPEG-4 transmitter
on analogue monitors.
The VIP 10 provides the
complete range of proven features, including
Dual Encoding for best use of bandwidth, PTZ
control and a FastEthernet port. A USB interface
affords connection over wireless LAN, DSL, ISDN
or PSTN. Alternatively it offers local disk or
Flash memory recording and thereby support of
fault-tolerant network video recording with
VIDOS-NVR.
Ultra-compact in size the
VIP10 is perfect for any application that
depends on space-saving solutions.
Highlights
-
Single channel standalone encoder or decoder
- MPEG-4 standard @
full D1/4CIF/2CIF/half D1/CIF
- M-JPEG @ 720x576/480 pixel
- Ultra-compact in size
- Bandwidth efficient Dual
Encoding
- FastEthernet
interface
- Full duplex audio
transmission
- Comprehensive security
features
- Multicast & Internet Streaming
- Alarm inputs & relay output
- Serial data port & USB
interface
Technical
Data
Video Standard
MPEG-4 (ISO/IEC 14496), M-JPEG
Audio Standard
G.711; 300Hz - 3.4KHz
Video Data Rate
9.6 kBit/s - 4 MBit/s (MPEG-4)
Audio Data Rate
80 kBit/s
Audio Sampling Rate
8 kHz
Video Resolutions
720x576/480 full D1: 7 fps
704x576 4CIF: 7fps
704x288 2CIF: 14 fps
352x576/480 half D1: 30 fps
352x288 CIF: 30 fps
176x144 QCIF: 30 fps
Overall Delay (IP)
100 ms
Network Protocols
RTP, Telnet, UDP, TCP, IP, HTTP, IGMP, ICMP, ARP,
DHCP, SNMP
Software Update
Flash ROM, remote programmable
Configuration
Via web browser, built-in web server
Local RS232/422/485 port
Video In (Encoder)
1x
Analogue Composite: NTSC or PAL
BNC connector 75ohm switchable, 0.7 - 1.2 Vpp
Video Out (Decoder)
1x
Analogue Composite: NTSC or PAL
BNC connector 75ohm, 1 Vpp
Audio In
1x clamp mono line in, 3 Vpp, 50 kOhm
Audio Out
1x clamp mono line out, 2.5 Vpp, 60 mW, min 8
Ohm
Alarm Input
2 x clamp (non-isolated closure contact type),
max activation resistance 10 Ohm
Relay Output
1x clamp, 30 Vpp, 1A
COM-Port
1 x RS232/422/485, 9-pin Sub-D
Ethernet
10/100 Base-T, autosensing, half/full duplex,
RJ45
USB Port
1x 2.0 external interface
Input Voltage
12 - 24 VDC, sprint clamp contact
Power Consumption
Approx. 10VA
Weight
Approx 0.3 kg
Operating Temperature
0 - 50 C (32 - 122 °F)
ambient temperature
Humidity
20 - 80%, atmospheric humidity (non condensing)
Approvals
IEC 60950; UL1950; J60950; AS/NZS 3548; EN
55103-1,-2; EN 55130-4; EN 55022; EN 55024; EN 61000-3,-2;
EN 61000-3,-3, FCC 47 CFR Ch. 1 Part 15
Contents of delivery
- VIP 10 Encoder or Decoder
including plug-in power supply
- RS232 null modem cable
- Brief description "Quick
Installation Guide"
- CD-Rom with decoder
software and manual
Downloads
VIP 10
Datasheet (217KB)
VIP 10
Manual (2,252KB)
SLD
Security & Communications
The Old Forge, Ockham Lane
Ockham, Surrey
GU23 6PH
England
Tel: +44.1483225633
Fax: +44.1483225634
|
